erd09 -15s erd09 -13s ERD09-13S - erd09-15s maximum recurrent peak reverse voltage v rrm 1500 v max imum rms v oltage v rms 1050 v maximum dc blocking voltage v dc 1500 v maximum average forw ard rectified current 9.5mm lead length, @t a =75 peak forw ard surge current 8.3ms single half-sine-w ave superimposed on rated load @t j =125 maximum instantaneous forw ard voltage at 3.0 a v f v maximum reverse current @t a =25 at rated dc blocking voltage @t a =100 maximum reverse recovery time (note1) t rr ns typical junction capacitance (note2) c j pf typical thermal resistance (note3) r ja /w operating junction temperature range t j storage temperature range t stg note:1. measured with i f =0.5a, i r =1a, i rr =0.25a. z and applied rev erse v oltage of 4.0v dc. i fsm a -55----+150 -55----+150 i r 70.0 10.0 200.0 1.5 a 1300 910 1300 32 22 600 current: 3.0 a 3.0 a i f(av) features fast recovery rectifier diodes maximum ratings and electrical characteristics @ t a = 25 c unless otherwise specified single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. characteristic symbol unit ! ! terminals: plated leads solderable per mil-std-202, method 208 ! polarity: cathode band ! weight: 1.2 grams (approx.) ! mounting position: any ! marking: type number case: do-201ad, molded plastic mechanical data low cost diffused junction low leakage low forward voltage drop high current capability easily cleaned with freon,alcohol,isopropanol and similar solvents ! ! ! ! ! ! do-201ad dim min max a 25.40 b 7.20 9.50 c 1.20 1.30 d 4.80 5.30 all dimensions in mm a a b c d 1 of 2 www.sunmate.tw 3. thermal resistance f rom junction to ambient. 2. measured at 1.0mh voltage range: 1300 - 1500v
t j =25 pulse width=300 s 0.04 0 . 80 . 6 0.01 0.02 1 . 0 1 . 2 1 . 4 0.06 0.1 0.2 0.4 2 1.0 4 100 10 1 . 6 1 . 8 2 . 0 1 0 20 t j =125 8.3ms single half sine-wave 2 4 1 08 10 0 40 60 80 10 20 30 40 50 60 70 80 0 0.5 20 1.5 1.0 0 2.0 2.5 3.0 3.5 40 60 80 100 120 140 single phase half wave 60hz resistive or inductive load pulse generator (note2) d.u.t. 1 n.1. 50 n.1. oscilloscope (note 1) (+) 50vdc (approx) (-) 10 n.1. (-) (+) -1.0a -0.25a 0 +0.5a t rr 1cm amperes amperes amperes junction capacitance,pf instantaneous forward voltage,volts reverse voltage,volts peak forward surge current instantaneous forward current set time base for 50/100 ns /cm ambient temperature, number of cycles at 60 hz notes:1.rise time =7ns max. input impedance=1m .22pf fi g. 1 -- reverse recovery ti me characteri sti c and test ci rcui t di agram fi g. 2 --forward derati ng curve fi g. 4--typi cal forward characteri sti c fig.5--typcal junction capacitance 2. rise time=10ns ma x. source impeda nce=5o average forward current fi g. 3 --peak forward surge current .2 t j =25 f=1mhz 1 .1 2 4 .4 1 . 0 2 40 10 20 60 100 4 10 20 40 100 2 of 2 www.sunmate.tw
|
